[−][src]Module rmicrobit::_doc_setup

How to use rmicrobit.

How to use rmicrobit

Setting up a new project

You will typically need:

The following instructions are written for Debian 10 ('Buster'). For other platforms, see The Embedded Rust Book.

Install the following packages:

Create a new project using the rmicrobit-quickstart template:

cargo install cargo-generate

then

cargo generate --git https://mjw.woodcraft.me.uk/rmicrobit-quickstart/git/

or

cargo generate --git https://github.com/mattheww/rmicrobit-quickstart

The template provides the following files:

The example main.rs uses cortex-m-rtfm and cortex-m-semihosting, but projects using rmicrobit don't have to do so; you can remove them from Cargo.toml if you don't need them.

Running the new project

Connect your micro:bit to your development machine by USB.

In a separate shell session:

openocd -f interface/cmsis-dap.cfg -f target/nrf51.cfg

In the new project directory:

cargo run

This should launch gdb, which should tell the OCD server to flash the program onto the micro:bit and run it. Use Ctrl-C followed by Ctrl-D to exit.

To change which version of gdb it runs, edit .cargo/config. To change the instructions that gdb follows, edit microbit.gdb.

Tips

If you use panic_semihosting, as the example main.rs from the template does, messages from any panics should appear in the output from openocd. If other output from openocd is getting in the way, add something like -l /tmp/openocd.log to the command line used to launch openocd.